Legacy Windows Archive ( Read Only )

There is no dial tone (or dialing) when I attempt to go online with a Network (Dial-Up) Connection. (A 633 error message appears.) I have been through the Modem Troubleshooter, but everything seems to be in order. The modem is enabled. Under Modem - Properties, Device Status says,"This device is working properly" The modem will dial and send faxes just fine. (I tested this again right before posting.) I am using a Dell Inspiron notebook with Windows XP Service Pack 2. I have added no new hardware. The only things I did right before this problem (and the 633 error) occurred were: 1) Use and configure the Fax Console for the first time and send a fax. (I …

is there any way of changing the location of the temp file in C:\documents and settings\(me)\local settings? Am trying to burn a dvd through Nero and receive the message "not enough space for temporary files in the specified folder.(gives location of folder) .there are 468 MB abailable but the recording process will need 3479 MB". . thanks in advanced to anyone who can help. . . R E (Gene) Foltz

I am using Windows XP SP2. > I was trying to change a word document into a pdf. It was taking a long > time and nothing seemed to be happening. After several starts and stops I > managed to change the file. However, a window briefly appeared (1-2 seconds) > that I was unable to read. After this lightning fast window disappeared all > of the icons on my desktop were framed in blue and the text box was also now > filled in with blue. I thought this was strange but the system still > functioned. It just looked funny. This went along for about 12 hours during > which time I shut down three times as I had to move my laptop. After …

CreativeLabs released yesterday a new set of drivers for their cheaper line of sound cards in Vista x64. New version is dated July 9th and is 1.04.0077 Prior version was 1.04.0076 (June 25th) and misteriously disappeared from the version log in Creative site. Here is the drivers download/changelog page: http://asia.creative.com/support/downloads/download.asp?MainCategory=1&nRegionFK=&nCountryFK=&nLanguageFK=&sOSName=Windows+Vista+64-bit&region=2&Product_Name=Audigy+LS+%28SE%29&Product_ID=10365&modelnumber=&driverlang=1033&OS=27&drivertype=0&x=12&y=12 It seems that the only reported change is "Enables 44.1 kHz…

Hi I have a question, Can we deploy .msu package for Windows defender through SMS in Windows Vista operating system based PC's? Please let me know if that is possible or not. If that is possible let me know the procedure how we can do that. Regards, Vamsi

Well, the mystery continues. Photoshop 6 and Open Office Calc no longer work again. Photoshop error report reads as follows: Error signature AppName: photoshp.exe AppVer 6.0.128.0 ModName: gdi32.dll ModVer 5.2.3790.4033 Offset 00020788 opening up the "error report contents": Exception Information Code: 0xc0000005 Flags: 0x00000000 Record: 0x0000000000000000 Address: 0x Well crap, the message just left the screen. Argh!

Hi, I have got a trust between a NT4 domain and Windows 2003 domain, I'd like tu raise the level of the domain from "Windows 2000 native" and the forest from "windows 2000" to "Windows Server 2003", are there problem with this task, should I make something for keep the trust working Thanx, Gabriele

Hi I cannot install the DotNetFrameWork 2 at my computer. the installation log file is about 2Mbytes so that I cannot put it here. Does any one has same problem and fixed it ? -- Gordon

We are trying to run a program and everytime we start it up it says that something is connected to the RS-232 port and that it can't use it. This has worked fine for 8 years , but someone started screwing around with it yesterday and now whenever we try and start up the program it indicates that the RS-232 program is already in use. I'm not completely sure of the logistics of what happened, but was told that someone deleted the directory in Program Files for the program and then re-installed it. So I'm trying to figure out where in the registry or how I can trace back and figure out what is connecting to the RS-232 port.

The little loudspeaker icon that used to be in my system tray (the one that launches the volume-control panel) disappeared. I'm sure there's some simple way to get it back, but I haven't been able to figure out how. Anyone know how to get it back? -- Cheers, Robbie Hatley lone wolf aatt well dott com triple-dubya dott tustin free zone dott org

Hi, >From windows components wizard, I see that I can add "Terminal Server" component. But I already has terminal service runing on the server by default and people (limit is 2+1, isn't it?) can use remote desktop to connect to this server. Can someone tell me what I will get from adding this "terminal server" component? Many Thanks Jerry

Hi all, I'm having a problem where I can connect to a client's VPN 100% of the time, but can only RDP into or ping their local machines maybe 30% of the time (it seems to have periods where it's working and then periods where it's not working). I'm not after so much a solution, because I realise that this is nowhere near enough information for someone to even begin to try to figure out what's wrong (although if you have a solution that would be fine :) ), but more tips on how/where to even START looking. Also, we VPN into a number of other clients' machines, and both the VPN and being able to RDP into their machines works 100% of the time (we are experienci…

I want to connect to a remote server throughh the Interent. The server has DSL connection and so do I. I konw the user ID and password use on the server and I want to encrypt information. What do I need o do? -- KC

When we start our second computer we get a stop error and the screen comes up saying that we need to run a chkdsk /f but when we were finally able to get the prompt to come up again it said bad command. Has anyone ever dealt with one of these and is it completely hopeless. We cannot get the computer to start in any mode (last config or anything). Any advice would be great

I was having problems with Kodak EasyShare. One solution suggested to take it out of the MSCONFIG file. I ran MSCONFIG, clicked the Kodak EasyShare, clicked Apply. It then told me that I needed to reboot my computer. I did. Now the system comes up Start Windows Normally or Start from last Known Settings that Worked. No matter what I click, it goes back to this screen. What did I do?! How can I fix it? Please help - cf