Legacy Windows Archive ( Read Only )

Jack S wrote: > I've got Acronis True Image 9. > > I'd like to do something fairly simple - backup XP with all it's updates and > settings, and have a disk that I can boot off of to get the system up again > in case my o/s gets blown away (we have lots of lightening and power spikes > around here). > > I'll be damned if I can figure out how that's done from the Acronis info. > > It'd be great if I can get some valid info - thanks. > > Make an *image* someplace like on a USB drive or such. Make a bootable CD recovery CD. Now when the drive or OS dies, you pull out the boot CD, connect the USB drive, boot the…

I want to create a software raid for my 2003 server. I believe i have to convert both hard drives to dynamic disks.My question is this: when i add the second drive(drive to be mirrored to) must the disk be formatted or unformatted?Microsoft says RAW or unpartitioned but this doesnt answer my question Thanks

I am getting the blue screen Stop: C000021a {Fatal System Error} Logon Process terminated error upon boot. There were some viruses on the PC which were removed in safe mode with AVG. However, I think the lsass.exe was terminated in the task manager during the process. Any Ideas? Would the lsass.exe file cause this stop error? Thanks.

Hi i just installed att bell south faster speed to replace my slow dialup every thing seemed to work fine until i got this error message on starting my computer this morning : could not find webworks.exec program files\2webworks.exec reloading program may solve this error. What program should i reinstall as it does not seem to say what the program name is . or if webworks is the name where do i find it to reinstall the computer seems to be working o.k. so far i am running x/p sp2 Thanks for any help anyone can give me Jessie

i am running Windows Server 2003 ent Edition 32-Bit edition with SP1 on Dell Precision 370(x86 based computer) with NVIDIA 6600 PCI Express 256MB Graphics card. I have installed 4 GB of RAM(2GB per memory Module). i have enabled /PAE in boot.ini even after that my computer shows 3.00GB in system properties. It shows total physical memory to be 3,143,736KB. how can i address full 4GB memory given the fact that i have installed 4GB of physical memory. regards

My OS is WInXP. I have an application. I want to set its priority to below normal or low after I start this application. I desire to do it through a batch file. How can I do it? Thanx/NSP

Hi, How can the windows xp application detect if the lan interfaces goes down? Is there any event or notification generated that can interrupt the application for the same? With Regards, Ketan

Greetings, Due to miscellaneous problems, I just reformated my hard drive and re-installed the OS from disks. Unfortunately, in spite of the fact that the BIOS indicates that sound functionality is enabled, the hardware menu under the system folder does not show the sound hardware and or drivers. Perhaps the built-in sound card has gone bad? Or is anyone else aware of any BIOS/OS parameter and/or installation I can execute to re-add the sound hardware and drivers? Otherwise, any tips on pinpointing the sound card as the faulty component would be appreciated. Thank you for your help. Jean-Pierre

This update fails to install either from the PC when active or when turning the PC off. version: XP Professional SP2 Any hint as to what to do? Thanks, Pierre

All the sudden I get this message when trying to right click and drag a file to a directory on our network: Do you want to move or copy files from this zone? And it has the words Internet Explorer in the upper left hand corner of the dialouge box. Typically when I right click and drag a file to a directory, it gives me the option to copy or cut and so forth...And this is only happening on network drives. It works normally on my local drive. Did I set something that is causing this now? I've rebooted the machine. I'm running XP Pro SP3. I installed SP3 a couple of weeks ago and didn't have this problem then. Just started today. Thanks, Greg

I'm running 2003 server with TS at my office and I would like to change out my LPT printer at home with a Ethernet based printer since USB is not supported. Will I be able to print to a Ethernet printer through my RDP at home? Steve

Having a issue with a Win 2003 R2 server, Server is a DC, Exchange 2003, DNS, DHCP and File and Print server. Issue started about 2 weeks ago users will not be able to get to any shared folders or print. Exchange is still up and running with out a problem so the network card is not the issue. TCP/IP TOE is disabled. I've even completly disabled Symanted Endpoint Protection. But still having the issue. Nothing shows up in application or system logs. So far the only thing I have found is to do a reboot of the server to get it back up and running.

I have the antivirus xp 2008. One microsoft discussion group suggested that one easy way of getting rid of this monster is to go to system tools and create a new system restore point and then restore the system. I tried to do this but the only highlited system restore date for the month of august was today's day at a time after my computer became infected. Is it possible to set another resore point even though no other dates in august are highlited. This virus is reaking disaster on my computer. Thanks in advance/ Al -- al

I want to create a boot CD for my PC with XP. It looks difficult, I'm not an IT wizard but am proficient with tinkering around and following instructions; I have read articles about how to do this and it looks like a) you can create a boot disc - floppy disc version - if you have a floppy drive. If you don't (I don't) you can buy an external floppy drive that links in via a USB. b) OR, you can go through the process of creating a CD which requires some skill. Other tasks linked to this are: Creating a copy of XP files with all your preferences saved including drivers etc...via Slipstreaming. ALso a bit scary and complex to me. I also think …

Hi: This is my first Terminal Server. I have it up and running and people runnning the application properly. Now I want to have people printing. They are coming through a VPN using RDP and I want to install the Print Drivers on the TS. How do I do that??? 1. Install as local?? or Networked form the menus under 'Add Printer'?? 2. Picking a port?? Which port, LPT, USB, Create Port???? 3. Then what?? or is there another totally different process?? This first one will be a printer install on a client's PC, but then I also want to install a networked printer on the TS that is located on the Remote Network. Help?? I have cruised the Internet, and …