The Archive ( Read Only )

Hello to all, I wanted to ask information on Bluetooth modules and the Airport form of a Mac Pro 1.1 . I have read several guides and I found that all always refer to insert the wires that actually would be three, one for the bluetooth module and the other module for the Airport. I wanted to ask but these leads are key to the bluetooth card and airport or they can also be used without cables ? If you are critical you can tell me where can I buy them ? Thank you, Vincenzo Source: MacRumors

I copied some files to my Lacie 2TB external HD. The operation seemed to be successful, however the disk showed up with no files. I ejected the disk and reinstalled – the Lacie will not mount on the desktop. It shows in the Disk Utility as "AppleAPFSMedia then underneath Uninitialised. In the info shown below the Partition Map: not supported SMART status: not supported I have tried disk repair, it will not initiate, it will not mount. I have even tried to do the same in Mac Recovery Disk... Read more Source: MacRumors

I have Catalina running on a true cMP 5,1, with OpenCore. Catalina is installed on a NVMe attached to a SYBA PCIe card. I want to add a second NVMe into SYBA and install Windows 10 on it. Can you please provide a link to an up to date procedure? Source: MacRumors

Is the mid 2010/2012 Mac Pro Compatible with the AMD Firepro W9100 or W8100? https://forums.macrumors.com/attachments/1622492523610-png.1784752/ Source: MacRumors

Ok, I left the title general to try and get people in here who would normally yell at me to use the search function, but I am looking for specific info that I have not been unable to find. I am about to start production on a high end automotive series and am considering my editing machine which is a 4,1(specs below). The media I’m capturing is 4k dci in either prores HQ or 422 with the occasional possibility of prores raw(my nle causes issues here) and CinemaDNG raw in 24 and 60fps, and the... Read more Source: MacRumors

Hi folks ;-) I have a Sapphire RX580 Pulse 8GB a Version without a Bios Switch 8GB Ram MT51J256M3 The Sticker reads 99-1E387-000SA 11265-05 GOP Driver Name: AMD GOP X64 Release Driver Rev.1.65.0.15.50.Sep 28 2017.15:11:11 Info from Rom Code: Adapter 0 (BN=05, DN=00, FN=00, PCIID=00001002, SSID=0000E387) Asic Family : Polaris10 Flash Type : M25P20/c (256 KB) Product Name is : E353 Polaris20 XTX A1 GDDR5 256Mx32 8GB Bios Config File: 353Y6MBU.O50... Read more Source: MacRumors

With no dual vbios switch on the card. Please could I receive a copy of your vbios/rom? My card had been re-flashed by previous owner for mining with a modified non matching vbios/rom from an E353 card, so I can't see the boot picker screen in OC. Ive downloaded the E387 vbios/rom matching my card part number from TechPowerUp flashed my card, several times, but still no boot picker :( TIA Source: MacRumors

Hi all. I have a problem that I really don’t understand... I'm trying to install my pre flashed Titan Ridge V2 on my Mac Pro 5,1 running High Sierra, to be able to use my Focusrite Clarett 8Pre sound card. I have done a fresh High Sierra installation on an old SATA drive, everything works as it should, without Open Core, all I need to do is one restart and it’s up and running and works great. But here’s what I don’t understand, when I do exact the same installation, but on a Samsung SSD 870... Read more Source: MacRumors

Hi, I have an iPhone 12 and the notifications for some iMessage conversations are silent (they appear on the Lock Screen, but there's no sound or vibration). The volume on my phone is maxed out, notification sounds are enabled for iMessage and the "Hide Alert" tab is disabled for all conversations. How do I fix this? I keep missing notifications. Thanks Edit: Ok so I actually just got a notification making a sound from one of these conversations. But just this once. Now it's back to silence. Continue reading...

Hi, I noticed that for the past few months when people called me, the phone did not ring and terminated the calls right away. In the record, it just said such and such person called but I was not around even I was in front of the phone when they called me. Am I in some kind of mode after iOS update? How to return to normal? I am using iPhone 6S+ with iOS 15.3 Continue reading...

So first off I might be overthinking this and I apologize if it’s something simple. I am trying to send photos that were originally taken two years ago that are stored in iCloud. When I attempt to email the photos the receiver receives them however it appears the EXIF data is stripped from it. If it makes any difference I’ve replicated the same thing when sending the photos to myself and opening them up in Outlook on a desktop. When I open the photos on my iPhone via the email client and... Read more Continue reading...

I just moved my data from my XR to a Pro 12, everything went smoothly except my mini homepod does not recognize my new iPhone when I try to set a reminder. Siri says make sure my phone is powered on, on the same Wi-Fi network which is. Also I can't unlock my iPhone while wearing a mask with my Apple watch. Any suggestions? I did not wipe my XR yet I wanted to make sure everything works first if that makes a difference. Thanks Continue reading...

iPhone 13 Pro. Is there a provision for audible repeat alerts for "missed calls", as there is for "messages"? Continue reading...

Having barley justified the cost of my lovely new 7,1 Apple's new 6K display is out of the question. I've used my ageing but capable 30" Apple Cinema Display for a while now and it still suits me very well. For audio production I really appreciate all that 16:10 visual real estate and it's one of the few displays out there that really compliments the 7,1 aesthetically. Retina will be a nice upgrade later down the line, but I'm not a graphics or video editor who really needs it. But to... Read more Source: MacRumors

Hi there - so I have Martin Lo's OC build running happily on my cMP. Got a BT USB dongle b/c the integrated BT is terrible and can't even reliably send music to my stereo system <10 feet away. I plug it in, and the cMP refuses to hand over to the USB. I do some research, and decide to boot without OC (after removing my Windows SATA drive!), and it works instantly on reboot. What's going on here? I wouldn't think OC would reject a USB BT dongle, but...here we are. Is this Secureboot being... Read more Source: MacRumors

How bad is the dongle solution compared to an internal bluetooth upgrade? All I care about right now is having usable AirPods. I understand how the internal upgrade works but the process just has so many potential points of failure. Not to mention, the dongle is comparatively inexpensive (where I live at least). Source: MacRumors

Hello together, I'm currently building up a Hackintosh. Therefore I would like to casemod an old MacPro. Now I have emptied up the MAc, but get stuck at the metal board below the PSU and DVD drive bay. I removed all screws, but the board does not come off? Any ideas or hints? Thanks, Patti https://forums.macrumors.com/attachments/img_1223-jpg.1954268/ https://forums.macrumors.com/attachments/img_1222-jpg.1954269/ Source: MacRumors

I'm currently in the process of cleaning up the Northbridge due to it overheating. I've removed one of the heatsinks but the other one won't come off. 3 of the screws unscrew, but seems like one of screws is either missing or trapped as I can't get any traction on anything. Source: MacRumors

Was testing out the new modes for the first time today and somehow on the standard mode got stuck on “rich cool”! Trying to click the reset button does nothing like on the other modes. My only option to use regular mode is to change another one of the modes to 0/0. Any ideas how to reset the camera app? I’m avoiding doing a reset all settings. https://forums.macrumors.com/attachments/cc705d80-bd7c-44cb-b720-586148b9688b-png.1953811/ Continue reading...

Hi, I originally installed Catalina via Dosdude1's Catalina Patcher. It worked fine and all but I realized hardware acceleration for H.264 and HEVC wasn't working and updating to the latest version of MacOS was a chore. So I installed Opencore on my computer, those two previous problems were solved. I find having that patcher running is kind of redundant now that I have Opencore working on my machine, so I was wondering if theres a way to remove it? I tried through the terminal and got... Read more Source: MacRumors

hello, can anybody help me to understand what this means? (I have a macpro 5.1 runing OSX 12.1 that randomly freezing) I think the problem could be the GPU, but I'm not sure, here the message I receve panic(cpu 14 caller 0xffffff8013d029ad): userspace watchdog timeout: no successful checkins from WindowServer in 120 seconds service: logd, total successful checkins since load (3970 seconds ago): 398, last successful checkin: 0 seconds ago service: WindowServer, total successful checkins... Read more Source: MacRumors

*** For info, this mod is NOT compatible with the OpenCore boot screen mod *** This thread is about how to mod the Sapphire PULSE RX580 8GB card's ROM image. If you worry about bricking the card, or void the warranty etc. STOP HERE! For those who has MVC flashed RX580. Do NOT perform this mod. Any modification of the ROM will disable the Mac EFI UGA. And do NOT even try to flash the dumped (MVC) ROM back onto the card. Even this action may cause problem. As general... Read more Source: MacRumors

I could do this on T-Mobile but I just switched to ATT. I go to Cellular Plans> Voice & Data and tap LTE the iPhone still display 5Ge? Thank You Continue reading...

Приветствую! iPhone 13 1. Заметил такую штуку, что когда включена тёмная тема в настройках и открыть во весь экран серую ниже картинку, то можно заметить слегка видные следы верхнего бара, а это: время, сеть, батарея. Это вообще нормально? У многих такого нет, экран чистый. Ещё заметил что после ТикТока остаётся белая кнопка на экране слегка видная, но через некоторое время пропадает. 2. Включаем светлую тему и музыку, желательно с басом на всю громкость и всматриваемся в низ... Read more Continue reading...

Well, I have a Mac Pro 5.1. I am very happy with the Mac, it can do everything I need for now. However, the Bluetooth connection when my Mac is under a wooden desk really sucks! To solve the problem, I bought a small Bluetooth antenna and harassed on the back outside of my Mac. However, this antenna is not enough, connection problems are still there and I can not connect new Bluetooth devices such as bluetooth headphones which really annoys me, because I use bluetooth headphones on my Mac... Read more Source: MacRumors