Jump to content

Dalo Harkin

Members
 View Profile  See their activity

  • Posts

    4182

  • Joined

  • Last visited

 Content Type 

Everything posted by Dalo Harkin

  1. Dalo Harkin
    There is a difference in definition between meeting the minimum requirements and having playable framerates
  2. Dalo Harkin
    Hi, Welcome tp FPCH :)
  3. Dalo Harkin
    Make sure that you use a good TIM cleaner fluid to get all the old stuff off - and only use about a grain of rice of the paste - as it spreads very easily - do not be tempted to use more than needed as this has an opposite effect on transferring the heat :eek:
  4. Dalo Harkin
    Hi, Welcome to FPCH :)
  5. Dalo Harkin
    Check ALL the connections inside the PC - also have a look in the BIOS and check that the PSU voltages are at what they are meant to be.
  6. Dalo Harkin
    Are you sure that you are supplying enough power to the setup for SLI? Most SLI MOBO's have an additional 4 pin molex near where the 2 cards go to help supply more power. failing that you may have to tweak the options in the Nvidia drivers to optimise the SLI setup
  7. Dalo Harkin
    To rule out 2 and 3 - put the HDD in a tower PC and see if you get any joy.
  8. Dalo Harkin
    To rule out 2 and 3 - put the HDD in a tower PC and see if you get any joy.
  9. Dalo Harkin
    To rule out 2 and 3 - put the HDD in a tower PC and see if you get any joy.
  10. Dalo Harkin
    Sounds like the HDD is toast to me
  11. Dalo Harkin
    Sounds like the HDD is toast to me
  12. Dalo Harkin
    Sounds like the HDD is toast to me
  13. Dalo Harkin
    If you have unticked the boxes it relates to in MSCONFIG, then all should be ok - You need something much stronger than AVG though
  14. Dalo Harkin
    Right - go into the BIOS and disable the SATA port - thats why the system is stating no array defined, as the port is active, but there is nothing connected to it
  15. Dalo Harkin
    Whichever route, you wish to proceed down - you need to have an INTEL CPU and an ATI GPU at the heart of it - all the rest is personal preference
  16. Dalo Harkin
    WPA or PSK encryption will be enough to keep most out. You enable this in the routers home page
  17. Dalo Harkin
    I have just looked at the prices of the X1300 sub £40 :eek: And you are looking to play a game that was released this decade :eek: I am surprised you dont get lag on pacman :eek:
  18. Dalo Harkin
    I always miss these (not normally on at weekends) again another belated HAPPY BDAY MARA :)
  19. Dalo Harkin
    I had a quick look and the ones I was seeing were $100 (£50 ish) I wouldnt bother with it for that cost.
  20. Dalo Harkin
    I had a quick look and the ones I was seeing were $100 (£50 ish) I wouldnt bother with it for that cost.
  21. Dalo Harkin
    I had a quick look and the ones I was seeing were $100 (£50 ish) I wouldnt bother with it for that cost.
  22. Dalo Harkin
    You can - depending on the software you burn with - NERO has the ability to leave a disk open, for further burning later on ;)
  23. Dalo Harkin
    You can - depending on the software you burn with - NERO has the ability to leave a disk open, for further burning later on ;)
  24. Dalo Harkin
    You can - depending on the software you burn with - NERO has the ability to leave a disk open, for further burning later on ;)
  25. Dalo Harkin
    a CPU slowdown of it being irratic normally indicates you dont have a CPU driver installed - have a check on the MOBO chipset drivers if there is a later version.
×
×
  • Create New...